OPT3001EVM: OPT3001EVM

Ben Anderson

Part Number: OPT3001EVM

Hello,

I just purchased 7 OPT3001EVM modules and would like to design them into our test bed. Can you please provide a CAD model if the eval module? .STP file format is prefered.

Thank you

over 5 years ago

0 Alex Bhandari-Young over 5 years ago

TI__Mastermind 25845 points

Hi Ben,

I am not sure that we have this but I will double check. There may be a way to export a CAD model from the PCB design files.

Best,

Alex

0 Ben Anderson over 5 years ago in reply to Alex Bhandari-Young

Prodigy 30 points

Hi Alex,

Thank you for getting back to me on this. While .STP format is prefered, we can also accept the following file types: Parasolid, STL, and IGES.

Alternatively, if a CAD file is not available, is it possible to provide a drawing of the part, with key dimensions called out. IE, mounting hole diameter, hole location from edge of board, board length, width, and height, and location of the light sensor on the board.

Thank you.

0 Alex Bhandari-Young over 5 years ago in reply to Ben Anderson

TI__Mastermind 25845 points

Hi Ben,

Please find the step file attached.

Best,

Alex

OPT3001.step

0 Ben Anderson over 5 years ago in reply to Alex Bhandari-Young

Prodigy 30 points

Hi Alex,

This is perfect! Thank you :)

Sensors

Sensors forum

OPT3001EVM: OPT3001EVM