IWR6843ISK: Unable to connect to COM port, DS2 yellow LED not turning on in FLASH Mode

Jonah See

Prodigy 50 points

Part Number: IWR6843ISK

Hi,

I'm facing the same problem as the person in this forum

https://e2e.ti.com/support/sensors/f/1023/t/846748?IWR6843ISK-Cannot-connect-to-COM-Port#pi320995=1

My board was bought on 26.12.2018, so I'm guessing its a Rev A carrier board. May I know how to proceed from here?

over 4 years ago

0 Charles Oladimeji over 4 years ago

TI__Mastermind 33805 points

Hi,

Have you tried the suggestions in the same referenced post?

BR,

Charles O

0 Charles Oladimeji over 4 years ago in reply to Charles Oladimeji

TI__Mastermind 33805 points

Hi,

I assume you were able to resolve this and will be closing the thread. Please reply if you still need assistance or make a new post referencing this one.

Regards,

Charles O

Sensors

Sensors forum

IWR6843ISK: Unable to connect to COM port, DS2 yellow LED not turning on in FLASH Mode