In MIMO mode, the SDK and matlab scripts (radar_cascade_demo.m) are default parameters.
This is the range profile:
The corresponding distance should be about 2.7 meters (close to the actual distance).
This is the range-azimuth heat map:
The distance shown is about 5.4 meters, twice the actual distance.
Here's another one:
The corresponding distance should be about 5.3 meters.
It's also twice the actual distance.
This is the only part of the matlab code that I've changed:
How should I modify the code to make the range azimuth heat map appear correctly?
Thank you very much,
JG
