LMP91000EVM: SPIO-4, WaveVision5 Error message

Taketo Sato

Part Number: LMP91000EVM
Other Parts Discussed in Thread: LMP91000, WAVEVISION5,

Hello team,

My customer bought LMP91000EVM and SPIO-4 and tried to evaluate LMP91000. However they got below error message when using WaveVision5.

"A hardware error has occurred. WvBoardEnum call returned 'false' This is most likely caused by a failed data acquisition. ~~..........~~ If this error continues, please contact your National Semiconductor representative."

Could you please let me know what to do for this?

Best regards,

over 4 years ago

0 Josh Wyatt over 4 years ago

TI__Guru* 91206 points

Dear Sato-san,

That software package is not for this hardware setup. Please (if possible) ask where the idea came from that this was what to use, as if there is some documentation out there which says to do that, we need to take it down.

Please ask the customer to download the LMP91000EVM software (from the product page), here is direct link: http://www.ti.com/lit/zip/SNAC007?jktype=tools_software

Sensors

Sensors forum

LMP91000EVM: SPIO-4, WaveVision5 Error message