OPT3101: OPT3101 demo program

ko seyoung

Part Number: OPT3101

I am testing by connecting opt3101 to the NRF52810 project by I2C method, but the distance data is strange.
Can I get a demo source file?

over 5 years ago

0 Alex Bhandari-Young over 5 years ago

TI__Mastermind 25895 points

Hi,

OPT3101 is not plug and play as there is a calibration/configuration needed so want to make sure you are not just powering up without calibration as then distance data will be wrong. All this is done on the EVM but if you are using a custom board or doing something else want to make sure this is taken care of. We have a number of resources for this device to help. The SDK would the be demo code that allows you to run calibration and read data.

All can be found here https://e2e.ti.com/support/sensors/f/1023/t/815766

Best,

Alex

Sensors

Sensors forum

OPT3101: OPT3101 demo program