• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 277 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMP103: I2C input capacitance for TMP103

Peter Guan1
Prodigy 40 points
Part Number: TMP103
Other Parts Discussed in Thread: TCA9548A, TMP1075, TMP144, TMP104

Hi,

What's the input capacitance for the I2C pins on the TMP103? Any concerns with attaching 6+ TMP103 onto the same bus?

Thanks,

Peter

  • 0
    TI__Mastermind 35795 points

    Hi Peter,

    The TMP103 is offered with 8 variants, A through H, which offer different I2C addresses. They are intended to be used together on the same bus. You will not be able to exceed 8 devices on the same bus, because of address conflicts. You could use a I2C switch/multiplexer, such as TCA9548A, to access more than eight TMP103s. 

    I'm sorry that input capacitance is not specified in the TMP103 datasheet. We have a similar product built on the same silicon process which has an input capacitance spec of 3pF, so I would expect TMP103's input capacitance to also be 3pF. 

    TMP1075 is a similar device which has 32 configurable addresses. The smallest package is 2x2 WSON, and its one of our best cost-optimized sensors after TMP103.

    We also offer TMP104 and TMP144 devices which can daisy-chain more than 8 devices. These products use a UART interface. These devices have a 4 ball WCSP package similar to TMP103.

    thanks,

    ren