This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM60: paralleling LM60

Part Number: LM60
Other Parts Discussed in Thread: LMT70

Hi ,

I am left with only one adc channel.i have to measure temperature of 4 different devices.The design that i have employed will enable a LM60 one by one and temperature will be measured by adc.Tthe Vout of 4 LM60s are connected together.From what i understand from functional block diagram,Vout is pulled to gnd by a resistor (value not specified).If one LM60 turns on,it must be able to drive the Vout of other 3 LM60.,My query is whether this type of configuration will work properly or not?

Thanks in advance