DRV5032: Asking for the hall sensor DRV5032 design suggestion

SHH

Part Number: DRV5032

Hi team,

If customer will overlap DRV5032FA & DRV5032FD in the board layout (one of the two to mount on the board), could customer connect both of pin3 together?

BR,
SHH

over 3 years ago

0 Julio Apps over 3 years ago

TI__Expert 3665 points

Hi SHH,

For the FD version this will be OUT2 so you can use this pin as you like in your application, for the FA version this is a NC pin meaning there is no internal bond wire. So if you were to just replace the FD version with the FA version in the same layout that would be ok.

Sensors

Sensors forum

DRV5032: Asking for the hall sensor DRV5032 design suggestion