Other Parts Discussed in Thread: HDC2010,
I have HDC2010 EVM module. I'm trying to connect it with GUI Sensing solution EVM GUI (snoc028f) but I'm getting device driver not present error
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Thank you for your post.
If the HDC2010EVM was plugged in before the software was installed it could result in an incorrect driver.
Please refer to the following E2E thread for troubleshooting instructions: https://e2e.ti.com/support/sensors/f/1023/t/681030?HDC2010EVM-Driver-installation-issue