TIDEP-01011: Require the values for various parameters

Adithya Srinivas

Part Number: TIDEP-01011
Other Parts Discussed in Thread: AWR1843BOOST

Hello,

I wanted to know the values for the parameters mentioned below. I've also added a few of my questions related to the product.

1. Velocity Resolution:

2. Velocity Precision:

3. Processing time to identify objects:

4. Azimuth Angular Accuracy:

5. Azimuth Angular Resolution:

6. Elevation Angular Accuracy:

7. Elevation Angular Resolution:

8. Does it work with CAN protocol:

9. Will I have access to the height and width of the detected object?:

10. If I were to buy 8-10 of these products, will I be able to use all of them together to get the output? Or, will I be able to view all the outputs from the different sensors at one place?

over 4 years ago

0 Cesar over 4 years ago

TI__Guru*** 144394 points

Hi,

I recommend you review the TI Design TIDEP-01011 Design Guide

The demo runs on AWR1843BOOST EVM. This EVM does not have high elevation angular resolution so it will be difficult to determine height. The azimuth angular resolution is 4x better. So the performance should be better. You would need to perform experiments.

Will provide you more information by end of the week

thank you

Cesar

0 Adithya Srinivas over 4 years ago in reply to Cesar

Prodigy 40 points

Thank you, Cesar!

I look forward to hearing from you about the other parameters soon.

Regards,

Adithya

0 Cesar over 4 years ago in reply to Adithya Srinivas

TI__Guru*** 144394 points

Hi,

Here is some additional information. On some of the points will get back to you next week

thank you

Cesar

1. Velocity Resolution:

[Cesar] - Velocity Resolution depends on chirp/frame configuration. For the configuration provided with demo

2. Velocity Precision:

[Cesar] will get back to you on this

3. Processing time to identify objects:

[Cesar] - The frame duration is 50ms

4. Azimuth Angular Accuracy:

[Cesar] will get back to you on this

5. Azimuth Angular Resolution:

[Cesar] - Azimuth Angular Resolution is defined by the Antenna used. This demo runs on AWR1843BOOST. The Antenna used with MIMO mode provides azimuth angular resolution ~ 14deg

6. Elevation Angular Accuracy:

[Cesar] will get back to you on this

7. Elevation Angular Resolution:

[Cesar] - Elevation Angular Resolution is defined by the Antenna used. This demo runs on AWR1843BOOST. The Antenna used with MIMO mode provides azimuth angular resolution ~ 56deg

8. Does it work with CAN protocol:

[Cesar] - Yes, it supports UART and CAN-FD output