In the datasheet for the TMP112-Q1, it's stated that the SDA, SCL, and ALERT pins all require 5k pullup resistors.
Does the Alert pin still require a pullup resistor if said pin is not used?
Thank you for your help.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
In the datasheet for the TMP112-Q1, it's stated that the SDA, SCL, and ALERT pins all require 5k pullup resistors.
Does the Alert pin still require a pullup resistor if said pin is not used?
Thank you for your help.
Hi Brock,
The alert pin can be either be left floating or connected to GND if not in use.
Jalen