I forgot to remove R35 and R37 from the OPT8241-CDK-EVM before making externally initiated I2C queries and thus broke the OPT8241-CDK-EVM. Can I recover by following the instructions at https://e2e.ti.com/support/sensors/f/sensors-forum/635714/3d-tof-cdk-evm-i-have-a-booting-problem-in-cdk-evm/2366124#2366124, pre-programming the FX2 EEPROM with the firmware provided at https://www.ti.com/lit/zip/sboc456 ?
If so, what is the suffix on sboc456?
Thanks.
