This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV5032: Endurance cycle

Part Number: DRV5032

Hi Team,

One of our customer consider to use DRV5032 for the docking present detection. They like to know the endurance cycle for DRV5032, is it more than 10,000 cycles?

Look forward to your comments, thanks in advance.

Regards,

Don

  • Don,

    Our quality and reliability testing standards may be a useful reference here:

    https://www.ti.com/qualificationsummary/qualsumm/home?actionId=2800

    If you are rather asking about the number of times the magnetic field may be presented and removed from any particular device, I would expect this to not be an issue.  The device has no upper limit to the applied magnetic field, and is monitoring the resulting voltage across the Hall element due to the Lorentz force.  This essentially creates an unequal charge distribution through the conductive element when an applied current is driven in the sensor.  The resulting potential is quite small and shouldn't cause any significant stress on the device.

    Thank you,

    Scott