This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AFE58JD16: Fixing the attenuator resistor in fixed gain mode

Prodigy 250 points

Replies: 1

Views: 353

Part Number: AFE58JD16

Hi team,

With the AFE58JD16, in fixed gain mode, is it possible to fix the attenuator resistor?

I see that in the DTGC gain modes, you can fix the attenuator (with the FIX_ATTEN_EN_x and ATTENUATION_x registers).

Is there any way to do this (say to 50 ohm) in the programmable fixed gain mode?

Thanks,

Andy

1 Reply

  • Hi Andy,

    I'm taking this offline--check your email.

    Sincerely,
    Olu

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.