AWR1243: Image for the FTDI chip in AWR1xxx Devpack board

Adam Yao94020

Part Number: AWR1243

Hi champion,
My customer is building their own interface board like Devpack to loop the test signals on their RF board to PC. Ther want to get image which is used to configure the FTDI chip on Devpack to program the same part on their own part. Could you help to check how to support them?

Thanks,
Adam

over 8 years ago

0 Vivek Dham over 8 years ago

TI__Guru 58035 points

Hello Adam,

Please find atteched the FTDI template we have used on the devpack. This needs to be programmed using the FT Prog tool got from FTDI.

Regards,

Vivek

Fullscreen AR-DevPack-EVM-012.xml Download

<?xml version="1.0" encoding="utf-16"?>
<FT_EEPROM>
  <Chip_Details>
    <Type>FT4232H</Type>
  </Chip_Details>
  <USB_Device_Descriptor>
    <VID_PID>2</VID_PID>
    <idVendor>0451</idVendor>
    <idProduct>FD03</idProduct>
    <bcdUSB>USB 2.0</bcdUSB>
  </USB_Device_Descriptor>
  <USB_Config_Descriptor>
    <bmAttributes>
      <RemoteWakeupEnabled>false</RemoteWakeupEnabled>
      <SelfPowered>false</SelfPowered>
      <BusPowered>true</BusPowered>
    </bmAttributes>
    <IOpullDown>false</IOpullDown>
    <MaxPower>100</MaxPower>
  </USB_Config_Descriptor>
  <USB_String_Descriptors>
    <Manufacturer>FTDI</Manufacturer>
    <Product_Description>AR-DevPack-EVM-012</Product_Description>
    <SerialNumber_Enabled>true</SerialNumber_Enabled>
    <SerialNumber />
    <SerialNumberPrefix>FT</SerialNumberPrefix>
    <SerialNumber_AutoGenerate>true</SerialNumber_AutoGenerate>
  </USB_String_Descriptors>
  <Hardware_Specific>
    <TPRDRV>0</TPRDRV>
    <Port_A>
      <VCP>true</VCP>
      <D2XX>false</D2XX>
      <RI_RS485>false</RI_RS485>
    </Port_A>
    <Port_B>
      <VCP>true</VCP>
      <D2XX>false</D2XX>
      <RI_RS485>false</RI_RS485>
    </Port_B>
    <Port_C>
      <VCP>true</VCP>
      <D2XX>false</D2XX>
      <RI_RS485>false</RI_RS485>
    </Port_C>
    <Port_D>
      <VCP>true</VCP>
      <D2XX>false</D2XX>
      <RI_RS485>false</RI_RS485>
    </Port_D>
    <IO_Pins>
      <Group_A>
        <SlowSlew>false</SlowSlew>
        <Schmitt>false</Schmitt>
        <Drive>4mA</Drive>
      </Group_A>
      <Group_B>
        <SlowSlew>false</SlowSlew>
        <Schmitt>false</Schmitt>
        <Drive>4mA</Drive>
      </Group_B>
      <Group_C>
        <SlowSlew>false</SlowSlew>
        <Schmitt>false</Schmitt>
        <Drive>4mA</Drive>
      </Group_C>
      <Group_D>
        <SlowSlew>false</SlowSlew>
        <Schmitt>false</Schmitt>
        <Drive>4mA</Drive>
      </Group_D>
    </IO_Pins>
  </Hardware_Specific>
</FT_EEPROM>

0 Adam Yao94020 over 8 years ago in reply to Vivek Dham

TI__Genius 10910 points

Hello Vivek,
Sorry for late response. I am clear now.

Regards,
Adam

Sensors

Sensors forum

AWR1243: Image for the FTDI chip in AWR1xxx Devpack board