IWR1443: Application of mmWave for Building inspection.

Wee Beng Lee

Part Number: IWR1443
Other Parts Discussed in Thread: IWR1642

Hi, One of my clients is looking at radar solutions for building inspection, specifically to see through/see inside walls to inspect hidden wiring, conduits, pipes, etc.

Can you please help to route to the correct TI person in charge,

to let me know if it is possible for TI’s mmWave radar IC is able to perform such a function,

since it is indicated that mmWave radar can penetrate drywalls – how much is the penetration depth?

http://www.ti.com/sensing-products/mmwave/what-is-mmwave.html

I am looking at the Industrial mmWave sensors, either IWR1443 or IWR1642 – are these available now?

Can early access be provided? Pls advise, thanks.

best rgds,

LEE WEE BENG

over 7 years ago

0 Justin Curewitz over 7 years ago

TI__Mastermind 28055 points

The penetration of the device will depend on the chirp - drywall is not problem. See an experiment that was conducted here.

If you are interested in purchasing, I can put you in contact with a sales rep.

Regards,

Justin

0 ikon over 7 years ago in reply to Justin Curewitz

Genius 5355 points

Hi Justin,

What is the max penetration depth for concrete wall?

Customer is looking to develop an industrial version to

Thanks.

0 Justin Curewitz over 7 years ago in reply to ikon

TI__Mastermind 28055 points

Hi Ikon,

We have not tested with concrete. I would not expect to penetrate more than a cm.

Regards,

Justin

Sensors

Sensors forum

IWR1443: Application of mmWave for Building inspection.