DCA1000EVM: What's the difference between TSW1400EVM and DCA1000EVM ?

Bhaskar Dutta

Part Number: DCA1000EVM

I am aware the main difference between TSW1400EVM and DCA1000EVM is TWS1400 can only capture data for 10s but in non-real time whereas DAC1000 can capture for non-limited time in real time. What are the other main differentiation between them ?

over 6 years ago

0 Vivek Dham over 6 years ago

TI__Guru 58035 points

Hello ,
Functionality vis that is the main difference.
Another difference is that the DCA1000 also had the FTDI to allow the radar configuration over the mmwave studio tool on the PC. Incase of TSW1400 you have to use additional Dev Pack board to achieve that.

Regards,
Vivek

0 Anand Gadiyar over 6 years ago in reply to Vivek Dham

TI__Genius 14815 points

Note also that the SOP mode can no longer be controlled programmatically with the DCA1000, so you will need to have the right jumpers installed on the EVM.

Regards,
Anand

0 Bhaskar Dutta over 6 years ago in reply to Anand Gadiyar

Intellectual 335 points

What’s the difference between in terms of maximum data capture duration ?

0 Vivek Dham over 6 years ago in reply to Bhaskar Dutta

TI__Guru 58035 points

Hello,

Regarding the capture length difference, as indicated by you in the first post, the TSW1400 has a limit of 10sec. DCA1000 does not have an capture limit as such, it streams the data to the PC continously. So basically it would be limited by the PC used.

regards,

Vivek

Sensors

Sensors forum

DCA1000EVM: What's the difference between TSW1400EVM and DCA1000EVM ?