Other Parts Discussed in Thread: IWR1443
Hi,
I am trying to flash prebuilt_binaries for lab0016_zone_occ_14xx from mmwave_industrial_toolbox_3_1_1. It always fail at this error msg.
[12/30/2018, 7:44:16 PM] [INFO] Cortex_R4_0: Header of C:/ti/IWR1443_ES3.0/mmwave_industrial_toolbox_3_1_1/labs/lab0016_zone_occ_14xx/prebuilt_binaries/xwr12xx_xwr14xx_radarss.bin file indicates it is not a valid file to flash to IWR1443: 0xb55a03d1L
Full log is below
[12/30/2018, 7:20:39 PM] [INFO] Cortex_R4_0: Initialization complete.
[12/30/2018, 7:20:39 PM] [INFO] Cortex_R4_0: Flashing process starting...
[12/30/2018, 7:20:39 PM] [INFO] Cortex_R4_0: Connecting to COM Port COM6...
[12/30/2018, 7:20:39 PM] [INFO] Cortex_R4_0: Reset connection to device
[12/30/2018, 7:20:39 PM] [INFO] Cortex_R4_0: Set break signal
[12/30/2018, 7:20:39 PM] [INFO] Cortex_R4_0: Connection to COM port succeeded. Flashing can proceed.
[12/30/2018, 7:20:39 PM] [INFO] Cortex_R4_0: Reading device version info...
[12/30/2018, 7:20:39 PM] [INFO] Cortex_R4_0: ** 2 files specified for flashing.
[12/30/2018, 7:20:39 PM] [INFO] Cortex_R4_0: Checking file C:/ti/IWR1443_ES3.0/mmwave_industrial_toolbox_3_1_1/labs/lab0001-water-ground/lab0001_water_ground_pjt/prebuilt_binaries/xwr12xx_xwr14xx_radarss.bin for correct header for IWR1443.
[12/30/2018, 7:20:39 PM] [INFO] Cortex_R4_0: Header of C:/ti/IWR1443_ES3.0/mmwave_industrial_toolbox_3_1_1/labs/lab0001-water-ground/lab0001_water_ground_pjt/prebuilt_binaries/xwr12xx_xwr14xx_radarss.bin file indicates it is not a valid file to flash to IWR1443: 0xb55a03d1L
[12/30/2018, 7:20:39 PM] [ERROR] Cortex_R4_0: !!! Aborting flashing of specified files!!!
[12/30/2018, 7:20:39 PM] [INFO] Cortex_R4_0: Disconnecting from device on COM port COM6...
[12/30/2018, 7:20:39 PM] [INFO] Cortex_R4_0: Flashing instance clean-up initiated...
[12/30/2018, 7:20:39 PM] [INFO] Cortex_R4_0: Instance deinitialized!
[12/30/2018, 7:44:16 PM] [INFO] Cortex_R4_0: Initialization complete.
[12/30/2018, 7:44:16 PM] [INFO] Cortex_R4_0: Flashing process starting...
[12/30/2018, 7:44:16 PM] [INFO] Cortex_R4_0: Connecting to COM Port COM6...
[12/30/2018, 7:44:16 PM] [INFO] Cortex_R4_0: Reset connection to device
[12/30/2018, 7:44:16 PM] [INFO] Cortex_R4_0: Set break signal
[12/30/2018, 7:44:16 PM] [INFO] Cortex_R4_0: Connection to COM port succeeded. Flashing can proceed.
[12/30/2018, 7:44:16 PM] [INFO] Cortex_R4_0: Reading device version info...
[12/30/2018, 7:44:16 PM] [INFO] Cortex_R4_0: ** 2 files specified for flashing.
[12/30/2018, 7:44:16 PM] [INFO] Cortex_R4_0: Checking file C:/ti/IWR1443_ES3.0/mmwave_industrial_toolbox_3_1_1/labs/lab0016_zone_occ_14xx/prebuilt_binaries/xwr12xx_xwr14xx_radarss.bin for correct header for IWR1443.
[12/30/2018, 7:44:16 PM] [INFO] Cortex_R4_0: Header of C:/ti/IWR1443_ES3.0/mmwave_industrial_toolbox_3_1_1/labs/lab0016_zone_occ_14xx/prebuilt_binaries/xwr12xx_xwr14xx_radarss.bin file indicates it is not a valid file to flash to IWR1443: 0xb55a03d1L
[12/30/2018, 7:44:16 PM] [ERROR] Cortex_R4_0: !!! Aborting flashing of specified files!!!
[12/30/2018, 7:44:16 PM] [INFO] Cortex_R4_0: Disconnecting from device on COM port COM6...
[12/30/2018, 7:44:16 PM] [INFO] Cortex_R4_0: Flashing instance clean-up initiated...
[12/30/2018, 7:44:16 PM] [INFO] Cortex_R4_0: Instance deinitialized!
Then do MD5 checksum for bin files from both mmwave_industrial_toolbox_3_1_1 and mmwave_industrial_toolbox_2_5_1__win. MD5 code match. ES2.0 version do works for my old version IWR1443 boost
Question is: does ES3.0 use same ES2.0 bin file ? if not, could you provide link to download ES3.0 version files?
