IWR1642BOOST: IWR1642BOOST : Ask about Calibration using Tools

DongJae Kwon

Part Number: IWR1642BOOST

Hello, I'm using the "IWR1642BOOST" Radar product to make Fusion sensors.

I want to perform a calibration for the product. I am writing to ask you about the product because I do not know how to read the User Guide.

1. I'd like to ask for advice on whether the product should be calibrated, and how and how it can be done if necessary.

2. I wonder if you can perform the calibration with the tools provided by TI company.

over 5 years ago

0 CHETHAN KUMAR Y.B. over 5 years ago

TI__Mastermind 25815 points

Hello,

Could you please elaborate on what kind of Fusion sensor you are planning to perform?

Thanks and regards,
CHETHAN KUMAR Y.B.

0 DongJae Kwon over 5 years ago in reply to CHETHAN KUMAR Y.B.

Prodigy 30 points

I will use single camera sensor and radar sensor.

0 CHETHAN KUMAR Y.B. over 5 years ago in reply to DongJae Kwon

TI__Mastermind 25815 points

Hello,

Calibration could be performed depending upon the accuracy needed. Typically Range bias and Receiver channel gain/phase calibrations are done.

As shown below:

More details on this you could find from the SDK package

file:///C:/ti/mmwave_sdk_xx_xx_xx_xx/packages/ti/demo/xwr16xx/mmw/docs/doxygen/html/index.html

You could review some of the older E2E threads in Processor threads where you could find more details on Camera + Radar fusion in Vision SDK platform.

https://e2e.ti.com/support/processors/f/791/t/718776?tisearch=e2e-sitesearch&keymatch=fusion

Thanks and regards,

CHETHAN KUMAR Y.B.

alibration could be performed depending upon the accuracy needed. Typically Range bias and Receiver channel gain/phase calibrations are done.