TDC1000-TDC7200EVM: Problem getting data on the Graph tab and issues with the GUI

Manish Roy

Prodigy 50 points

Part Number: TDC1000-TDC7200EVM

I used the link http://www.ti.com/lit/zip/snac064

over 5 years ago

0 Bharat Aravamudhan over 5 years ago

TI__Genius 11015 points

Manish,

Please let us know the version of GUI you have, also note that we have discontinued this EVM.

0 Manish Roy over 5 years ago

Prodigy 50 points

I used the same link for the GUI.
But the Graph tab doesn't show the "Read All No Errrors" as shown in the User_Guide.
Also there is no tab for TDC7200 as in the User_Guide.

0 Manish Roy over 5 years ago in reply to Bharat Aravamudhan

Prodigy 50 points

The GUI version in 1.0.175

0 Bharat Aravamudhan over 5 years ago in reply to Manish Roy

TI__Genius 11015 points

Manish,

Add me to your friends list in this e2e and I will send you a working GUI. I will close this thread for now.

0 Manish Roy over 5 years ago in reply to Bharat Aravamudhan

Prodigy 50 points

Hi Bharat

I was able to resolve the GUI issue and also was able to connect the board pins to the oscilloscope to see the three signals START. COMP_IN and STOP.

Thanks
Manish

0 Bharat Aravamudhan over 5 years ago in reply to Manish Roy

TI__Genius 11015 points

Manish,

Glad you were able to get the GUI working.

Sensors

Sensors forum

TDC1000-TDC7200EVM: Problem getting data on the Graph tab and issues with the GUI