RTOS / TDC7201-ZAX-EVM：TDC7201 zax-evm cannot be measured

xiuxiu mao

Part Number: TDC7201-ZAX-EVM
Other Parts Discussed in Thread: TDC7201

Tool/software: TI-RTOS

I have successfully connected TDC7201GUI, but I have been unable to start measurement. My signal generator is not tektronix but DDS. Is there any difference between taike's INPUT and DDS's EXIT (IN)? DTG_TRIGG must be used?

over 5 years ago

0 Bharat Aravamudhan over 5 years ago

TI__Genius 11015 points

Xiuxiu,

Please let me know what is the DDS? This EVM works with a signal generator.
Also we should provide the TRIGG, please refer to the TDC7201 datasheet for information on the timing.

0 xiuxiu mao over 5 years ago in reply to Bharat Aravamudhan

Prodigy 80 points

Ok, that's a signal generator. The name is abbreviated as: DDS

0 Bharat Aravamudhan over 5 years ago in reply to xiuxiu mao

TI__Genius 11015 points

I am closing this thread since you have started another thread for this discussion.

Sensors

Sensors forum

RTOS / TDC7201-ZAX-EVM：TDC7201 zax-evm cannot be measured