IWR6843ISK: We can't load images.

chunghee cho

Expert 1180 points

Part Number: IWR6843ISK
Other Parts Discussed in Thread: UNIFLASH, MMWAVE-SDK

We can't load images.

It's still stuck on the this screen.

Hardware setup.

Error when i try mmwave demo visualizer

over 4 years ago

0 Akash Gondalia over 4 years ago

TI__Guru 50240 points

Hi Chunghee,

Your board looks good but you need to choose the correct COM port in Uniflash. This is located in the Settings & Utilities Pane and corresponds to the port listed as Class Application UART in the Windows Device Manager.

These steps are illustrated in the mmWave-SDK Demo User Guide, dev.ti.com/.../node

Cheers,
Akash

0 chunghee cho over 4 years ago in reply to Akash Gondalia

Expert 1180 points

Ports are set properly.

0 Akash Gondalia over 4 years ago in reply to chunghee cho

TI__Guru 50240 points

Hi Chunghee,

A possible solution might be to press the nRST button on your Carrier Board.

You should also make sure your port is not being used by another resource such as Tera Term or otherwise.

Cheers,
Akash

Sensors

Sensors forum

IWR6843ISK: We can't load images.