• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 279 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMP75B: Schematic review

user4979899
Expert 3080 points
Part Number: TMP75B

Hi Sir,

Could you please help on the TMP75B schematic review as below circuit?

Thanks

  • 0
    TI__Expert 6820 points

    Hi Anne,

    Schematic looks ok and aligns with recommended application diagram.  A few considerations to note: 

    We recommend placing the power-supply bypass capacitor as close as possible to the supply and ground pins. 

    Also we recommend the Pull up resistors on the open-drain output pins to a supply voltage rail through 10-kΩ pull-up resistors.

    Thanks,