AWR1642: How to flash XDS110?

He wei

Part Number: AWR1642

Dear officer,

We are building our own XDS110 debug probe board to work with AWR1642 radar board we designed. Can you guide us how to flash this XDS110? What is the tools and SW required to flash it?

Thanks and best regards

He Wei

over 5 years ago

0 Vivek Dham over 5 years ago

TI__Guru 58035 points

Hello,

You can refer to other e2e thread on this topic: https://e2e.ti.com/support/microcontrollers/other/f/908/t/725651?TM4C1294NCPDT-XDS110-Firmware-How-to-program-blank-AWR1642BOOST-board

Regards,

Vivek

0 He wei over 5 years ago in reply to Vivek Dham

Expert 1425 points

Dear Officer,

I gone through the link you proposed and the solution is fixed by the questioner himself and didn't describe much. Hence Can you guide me how to flash XDS110? What and where is this XDS110 firmware? Any doc?

Thanks and best regards

He Wei

0 Vivek Dham over 5 years ago in reply to He wei

TI__Guru 58035 points

Hello He Wei,

You can refer to the following user guide:

If you are using the new device you need to first download the bootloader and then the firmware. The instructions for these two are available in this user guide.

Regards,

Vivek

Regards,

Vivek

0 He wei over 5 years ago in reply to Vivek Dham

Expert 1425 points

Dear Vivek,

It solved by issue.

Thanks a lot for the help.

He Wei

0 He wei over 5 years ago in reply to He wei

Expert 1425 points

Dear Vivek,

Sorry to re-open it for one more clarification: When doing the XDS110 bootloader and firmware flashing, is the USB connection is sufficient? or We need to have extra XDS110 debug probe and 20pin to 14pin adaptor to complete this flashing task?

Thank and best regards

He Wei

0 Vivek Dham over 5 years ago in reply to He wei

TI__Guru 58035 points

Hello He Wei,

USB connection is sufficient.

Regards,

Vivek

0 He wei over 5 years ago in reply to Vivek Dham

Expert 1425 points

Clear and tks a lot.

Sensors

Sensors forum

AWR1642: How to flash XDS110?