TDC1000-C2000EVM: The VI is not executable. The full development version of LabVIEW is required to fix the errors

James Kohler

Part Number: TDC1000-C2000EVM

I am experiencing issues getting the EVM to connect, each time I start the GUI the above error occurs. I have been reviewing other posts but nothing seems to be helping resolve the issue. Any suggestions?

https://e2e.ti.com/support/interface/f/138/t/769984?DS125DF111EVM-The-VI-is-not-executable-The-full-development-version-of-LabVIEW-is-required-to-fix-the-errors

https://e2e.ti.com/support/sensors/f/1023/t/586944?LDC1101EVM-The-VI-is-not-Executable-Full-Development-Version-of-Labview-is-required-

over 6 years ago

0 Bharat Aravamudhan over 6 years ago

TI__Genius 11015 points

James,

Please let me know the version of Windows you are using and also if you have a complete version of LabView rather than a free demo version.

I am assuming you have even saving and unzipping the file before installing it as an ADMIN mode.

0 James Kohler over 6 years ago in reply to Bharat Aravamudhan

Prodigy 170 points

Thank you for the response. I am getting the error on Win10, no I do not have a complete version of LabView. As for your you last question I'm not sure what you are asking, did I unzipped the GUI file and install in on the computer as Admin? If so then yes to both.

0 Bharat Aravamudhan over 5 years ago in reply to James Kohler

TI__Genius 11015 points

James,

Please add me as a Friend in this E2E forum and I will send you the version of GUI that I had no problem in our Windows 10 laptop.

I will close this thread for now thanks.

0 Muhammet Uludag over 5 years ago in reply to Bharat Aravamudhan

Prodigy 205 points

Can you send me also ?

0 Bharat Aravamudhan over 5 years ago in reply to Muhammet Uludag

TI__Genius 11015 points

Muhammet,

Please send me a request for friend in this e2e forum and send a message along with that.

0 Muhammet Uludag over 5 years ago in reply to Bharat Aravamudhan

Prodigy 205 points

Bharat;

I have alerady send you a friendship request and I am waiting now.

0 Muhammet Uludag over 5 years ago in reply to Bharat Aravamudhan

Prodigy 205 points

Hi Bharat;

Still waiting. I have send a friend request

0 Muhammet Uludag over 5 years ago in reply to Bharat Aravamudhan

Prodigy 205 points

Bharat;

Have you got my friendship request ?

0 Bharat Aravamudhan over 5 years ago in reply to Muhammet Uludag

TI__Genius 11015 points

Muhammet,

I have accepted your request, please send a chat message and I will send you a link.

0 Muhammet Uludag over 5 years ago in reply to Bharat Aravamudhan

Prodigy 205 points

thats did not solve my problem. I run the gui which is send by you, but same result : "The VI is not executable. The full development version of LabVIEW is required to fix the errors".

I have some questions:

1) why i need complete version of LabView ? On the user guide there is no such a info like this and also you are saying me "may need", is not there any certainty ? To run yor gui what should i do? I have your evm but ı couldnt run it via your software. And there is no any info or video how to install your software or is you face any problem do this . Bharat this EVM is not cheap also there is limited info about your EVM. You answer me so late Give me a solution please to run this gui.

2) And on the forum you said this file work on our pc effectively . So do you have complete version of LabView ?

0 Bharat Aravamudhan over 5 years ago in reply to Muhammet Uludag

TI__Genius 11015 points

Muhammet,

I have answered your original post on the error that you encounter while you install this GUI.

Sensors

Sensors forum

TDC1000-C2000EVM: The VI is not executable. The full development version of LabVIEW is required to fix the errors