Other Parts Discussed in Thread: LDC1612
I am using LDC1612 IC in one of my modules for object detection purpose. Before Assembling the coil sensors in the modules, am validating them using LDC1612 EVM to detect the drive current as I don't know Rp of it.
My question is does the EVM has the hardware logic to change the detected drive current and Vosc given to the coil sensors?.
Because am using the LDC1612 IC with an LPC1115 IC, I doubt whether to add any software logic in my controller or to modify my hardware to change Idrive in my PCBA module?
The coil am using is of 24 turns, 2layered, 1Oz Cu thickness, 0.102mm track width and spacing. Capacitor used is 330pF in the tank circuit.
A clarification would be really helpful.
Thanks
Dinesh.