hi,
we have a question and hope to double-check with you.
Can we put a 0.47uF capacitor between VDD and GND ? the device is TMP235
Thanks
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
hi,
we have a question and hope to double-check with you.
Can we put a 0.47uF capacitor between VDD and GND ? the device is TMP235
Thanks
Dear Erwin -
A 0.1uF cap (connected as shown in Figure 15 on page 12 here: https://www.ti.com/lit/ds/symlink/tmp235.pdf) is recommended. Larger bypass capacitor value is allowed as needed. See wording in section 9 directly above the referenced figure.