This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
HDC1080: Influence of pcb-temperature on humidity measurement
Part Number: HDC1080
you wrote in the original question that a temperature offset because of pcb-heat will result in a relative humidity value lower than actual.
This results in my question:
If I calculate the absolute humidity (out of temperature with offset and humidity with error) - does it result in the same value as if I calculated the absolute humidity out of correct temperature without offset and correct humidity without error?
This would be the same effect when I have a fixed volume of gas with known temperature and absolute humidity. If I heat this gas, the absolute amount of humidity in this volume of gas will stay the same, while the temperature will increase and the relative humidity will be lower than before.
Am I right and can I use this dependency or are the dependencies and math operations more complex? Or is there a problem, that the gas in my case is not heated but only the sensor?
In reply to Matze:
Sure - it makes sense. let us know if you have a question about one of our devices.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.