AWR1443BOOST: Sensors forum

user6229302

Part Number: AWR1443BOOST

Hi,

Part number: AWR1443BOOST. Hello, has anyone tested drones with AWR1443BOOST? If so, could you please tell me the parameters set? The parameters I used barely measured the rotation of the drone's blades. Thank you.

Best Regards, user6229302

over 6 years ago

0 Cesar over 6 years ago

TI__Guru**** 151404 points

Do you plan to detect a drone? What speed, range ...?

Thank you

Cesar

0 user6229302 over 6 years ago in reply to Cesar

Prodigy 20 points

Hi，

Hello, I'm going to test the rotor of the uav. The rotor speed is 8000r/min, the blade length is 24cm, the linear velocity at the blade end is about 200m/s, the maximum detection distance is 200m, and the range resolution is 10cm. Do you have the right parameters? Can you share it? Thank you.

Best Regards, user6229302

0 Nitin Sakhuja over 6 years ago in reply to user6229302

TI__Mastermind 30405 points

Hello,

It is not clear from your query what exactly do you intend to measure/detect. Do you intend to measure the speed of the rotor blade i.e. 200m/sec?

200 m/sec is 720 Km/hr which is too high a maximum native velocity for the sensor. Please refer to the following threads for more information on considerations related to maximum velocity.

https://e2e.ti.com/support/sensors/f/1023/p/599726/2207881#2207881

https://e2e.ti.com/support/sensors/f/1023/t/611459

Thanks

-Nitin