This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

OPT9221: Slave I2C Interface : Base addresses

Prodigy 110 points

Replies: 1

Views: 43

Part Number: OPT9221

The documentation indicates that the Slave I2C Interface has two addresses, namely 0x58 and 0x5C. It is not clear which address is used for the (Depth Engine) DE and which are used for the (Timing Generator) TG.

Can I get a clarification about this issue.

Thanks,

Mo

  • Hello Mo,

    Regarding the questions related to OPT9221, please send them to the email list ti-3dtof@list.ti.com along with a reference to this E2E post.

    Regards

    Praveen

    TI makes no warranties and assumes no liability for applications assistance or customer product design. You are fully responsible for all design decisions and engineering with regard to your products, including decisions relating to application of TI products. By providing technical information, TI does not intend to offer or provide engineering services or advice concerning your designs.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.