• State TI Thinks Resolved
  • Locked Locked
  • Replies 5 replies
  • Answers 2 answers
  • Subscribers 32 subscribers
  • Views 461 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR6843AOPEVM: IWR6843AOPEVM(E2.0) vital sign lab

Seungsoo Lee
Prodigy 60 points
Part Number: IWR6843AOPEVM
Other Parts Discussed in Thread: MMWAVEICBOOST, MMWAVEPOEEVM, IWR6843AOP

Hello. I`m David.

I have one question. I bought iwr6843aopevm(E2.0) and tested the board for Vital sign lab. 

before buying this board I tried IWR6843AOPEEVM(1.0) and it was worked well. 

But now vital sign lab doesn't work. same flash and industrial tool box and newest one. 

This problem is from my mistake or ti new board cannot support vital signlab?  

  • 0
    TI__Expert 7510 points

    Dear David:

    Can you please verify that in your setup that you are using a MMWAVEICBOOST. If you do have the MMWAVEICBOOST in your setup can you please flash the device with the following binary:

    <Industrial Toolbox Install PATH>\labs\vital_signs\68xx_vital_signs\prebuilt_binaries\vital_signs_demo_68xx.bin

    Let me know if you can run the demo by using this binary, assuming you have MMWAVEICBOOST.

    Best regards,

    Connor Desmond

  • 0 in reply to Connor Desmond
    Intellectual 280 points

    Hi Connor

    We have the exact same problem.

    Hardware:
    - IWR6843AOPEVM
    - MMWAVEBOOST
    - MMWAVEPOEEVM (not used)

    Software:
    - Code Composer Studio, Version: 10.0.0.00010
    - mmwave_sdk_03_04_00_03
    - mmwave_industrial_toolbox_4_3_2
    - xdctools_3_50_08_24_core
    - xdctools_3_61_00_16_core
    etc.

    Any solution?

    We wanted to use "vital_signs_68xx_mss" or "vital_signs_68xx_dss" from "C:\ti\mmwave_industrial_toolbox_4_3_2\labs\vital_signs\68xx_vital_signs"

    One issue we solved so far (compilation not possible) is that the projects in "C:\ti\mmwave_industrial_toolbox_4_3_2\labs\vital_signs\68xx_vital_signs" apparently have a wrong path seeting in .cproject file provided. It refers to the file "C:\ti\mmwave_sdk_03_04_00_03\firmware\radarss\xwr6xxx_radarss_rprc.bin", which however is non existent. The file seems to have been renamed to "C:\ti\mmwave_sdk_03_04_00_03\firmware\radarss\iwr6xxx_radarss_rprc.bin". (I anx X)

    No data is received.

    Prebuilt binaries as suggested do not work.

  • 0 in reply to QumJo
    TI__Expert 7510 points

    Dear QumJo and David:

    Currently we do not support the Vital Signs Demo for the IWR6843AOP ES2.0 device. The provided binaries only work with ES1.0 devices.

    Best regards,

    Connor Desmond

  • 0 in reply to Connor Desmond
    Intellectual 280 points

    Hi Connor

    Thanks for the Update. Ups. What went wrong along the way? Can you give a rough estimate on when ES2.0 will be supported? Or can you give a hint on where we need to drill to fix it ourselves?

    Thanks,

    J

  • 0 in reply to QumJo
    TI__Expert 7510 points

    Dear QumJo:

    I can not give out any specifics. All I can say is that we are aware of the issue, and we will keep the community informed of any updates there might be with regards to the status of this issue in the future.

    Best regards,

    Connor Desmond