• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 47 subscribers
  • Views 267 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Compiler: Code Composer Studio™ forum

Yaron Addar
Intellectual 530 points
Other Parts Discussed in Thread: ADS54J40EVM

Tool/software: TI C/C++ Compiler

Hi 

We are using the TSW14J56EVM together with ADS54J40EVM.

Using these cards we are experiencing two main difficulties:

  1. The ability to reduce the density between pulses, most of the data retrieved from the sampler is redundant. There is a different case open on this issue (https://e2e.ti.com/support/tools/ccs/f/81/p/920778/3418449#3418449) 
  2. The ability to retrieve the data at the proper speed, case (https://e2e.ti.com/support/tools/ccs/f/81/p/923510/3412797#3412797) 

What I wanted to ask in this case, will it be easier to accomplish our needs if we bought the Xilinx  KCU10 card?

  • 0
    TI__Guru**** 162285 points

    Yadar,

    When creating a thread the questions asked in the submission form are used to direct the thread to the appropriate support team.  If you select that the issue is related to Code Composer Studio or the compiler then it goes to that team.  This thread and the 2 referenced in the post above have all been directed to the Compiler team.   This will cause a delay in getting a response as the question is not related to this software and the team then needs to figure out where to redirect the thread.

    When creating a thread if you enter in TSW14J56EVM or ADS54J40EVM as the part number then it should get directed to the correct forum automatically and will help you get a response much sooner.

    I will move this thread.

    Regards,

    John

  • 0 in reply to JohnS
    TI__Guru* 91947 points

    This is being addresses in another post.

  • 0 in reply to jim s
    Intellectual 530 points

    Hi John,

    Since you moved this thread to the correct location I cannot see it and did not get any response to it.

    Can you please check.

    Thanks,

    Yaron