IWR6843AOP: IWR6843AOP

QumJo

Part Number: IWR6843AOP
Other Parts Discussed in Thread: , SYSCONFIG, IWR6843

Hi Experts

I working with an IWR6843AOP in a custom design based around the IWR6843AOPEVM. Now I can't seem to find the pinmux file for the IWR6843AOP. (This is basically the same question as in https://e2e.ti.com/support/sensors/f/1023/t/915813?tisearch=e2e-sitesearch&keymatch=IWR6843AOP%20pinmux where the solution was provided apparently by email).

Thanks for your support.

Regards, QJ

over 4 years ago

0 Akash Gondalia over 4 years ago

TI__Guru 50240 points

Hi QJ

Thank you for letting us know, I am working to have a pinMux file for AoP as part of the tool. I will have an update for you in a few days.

Regards,

0 QumJo over 4 years ago in reply to Akash Gondalia

Intellectual 280 points

Hi AG

Thanks - looking forward to that!
Actually, I would prefer to migrate to your SYSCONFIG tool and use its Pinmux capabilities - as you suggest to move away from PinMux on your page. Is this the right approach?

Regards,
QJ

0 Akash Gondalia over 4 years ago in reply to QumJo

TI__Guru 50240 points

Hi QJ

Yes this is correct I am seeing how soon this can be updated. If it cannot be updated soon then we will provide an alternate means for resolution.

Regards,

0 Akash Gondalia over 4 years ago in reply to Akash Gondalia

TI__Guru 50240 points

Hi QJ

The update to sysConfig tool will be live with IWR6843AoP Pin Mux data in early December. Let me know if more assistance is needed earlier than this.

Regards,

0 QumJo over 4 years ago in reply to Akash Gondalia

Intellectual 280 points

Hi AG

Thanks for the info. Well, I'm implementing custom firmware these days, we have our first production bacth coming in beginning of December. If you could share a pinmux file for the AOP version that would be great. I assume files like sys_common_xwr68xx_mss.h etc. will remain valid?
I wonder whether in CCS i should use the Variant IWR6843 or IWR6843AOP switch? (project properties/general/Project ... I select family: Arm and variant IWR6843. If I select IWR6843AOP currently the build fails with all your example projects.

Thanks,