This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1843 | xWR6843 : mmWave Studio CLI Tool is available on TI-REX

Mastermind 41845 points

Replies: 1

Views: 33

We have recently released mmwave studio CLI tool on TI-Rex.

 

This tool is a demonstration of controlling mmwave sensor using command line interface (CLI). Here is the list of features this tool provides

  • Command-line interface to configure the mmwave sensor device over UART.
  • It uses all the CLI inputs from a text config file, so user can control the tool’s functionalities from this file.
  • It supports CFG or JSON (can be generated from Sensing Estimator) input file format for mmwave sensor configuration parameters.
  • Configures the DCA1000EVM and capture the ADC data from mmwave sensor to PC over Ethernet.
  • Capture the monitoring report generated from mmwave sensor to JSON files and later plot those data.
  • Post-process the captured ADC data using the Matlab tool.

 

You can find this tool at this link.

Please refer to the release note and other documents in this package for more detail on this tool.

P.S. - This tool is not a replacement of mmWave Studio GUI, which provides complex features for mmwave sensor device.

----------------------------------------------------------------------------------------------------------

Please check TI mmWave FAQs before posting a new query

OR

Use your search engine to look for some similar threads as shown below:

"site e2e.ti.com <Your query>"

----------------------------------------------------------------------------------------------------------

1 Reply

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.