DCA1000EVM: Scripted Data Collection

Badeea Alazem

Part Number: DCA1000EVM
Other Parts Discussed in Thread: AWR1843BOOST

Is there a way to script the data initialization and data collection on the DCA1000 + AWR1843Boost without going through the mmWave studio?

over 6 years ago

0 Jitendra Gupta over 6 years ago

TI__Guru 70180 points

Hi Badaeea,

To work with DCA1000 and AWR1843BOOST default tool we provide is mmWave Studio only.

There are other options which many of users on forum have obtained. Please go over these threads for other probable solutions.

https://e2e.ti.com/support/sensors/f/1023/t/791823

https://e2e.ti.com/support/sensors/f/1023/p/826017/3055751#3055751

https://e2e.ti.com/support/sensors/f/1023/p/758435/2803488

https://e2e.ti.com/support/sensors/f/1023/p/759979/2812538#2812538

Regards,

Jitendra

0 Badeea Alazem over 6 years ago in reply to Jitendra Gupta

Intellectual 315 points

Hello Jitendra,

I created a project in which i included the rf_api library and which had the script from the example inside the rf_api.h file. when i run the script it executes successfully but it outputs an empty bin file. can you advice on what i might be missing here?

Thank you,

Badeea

0 Jitendra Gupta over 6 years ago in reply to Badeea Alazem

TI__Guru 70180 points

Hi Badeea,

Make sure that all the API you call to DCA1000 using this tool is not returning any error value.

In next mmWave Studio release we are going to provide command line version of DCA1000 tool which can be used independent of Studio GUI. This version will be available around end of this month. Stay tuned to mmWave Studio webpage.

Regards,

Jitendra

Sensors

Sensors forum

DCA1000EVM: Scripted Data Collection