• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 161 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DCA1000EVM: OS for mmWave Studio

DCA1000EVM: Prerequisites

Tsurumoto
Genius 11760 points
Part Number: DCA1000EVM

Hi

There is the following description at DCA1000 user guide ch3.1

1: Could you please share more details or the materials related to above blue part.

    In addition to above, I'd like to know ho control Ethernet configuration on DCA1000? (FTDI?).

2: Regarding to the contents in above red box #2, is it talking about RS232(UART-USB) for XDS110?

   Is there any other purpose of this connection other than programing to DSP/ARM?

   Could you please share more details or the materials related to it?

Thanks and Best regards,

HaTa

  • +1
    TI__Mastermind 33805 points
    Tsurumoto said:
    Could you please share more details or the materials related to above blue part.

    The point here is that if you are send the API through an embeded application  like a host ( SPI interface), then mmwave studio is not required. 

    Please see the Interface Control document. This is available as part of the dfp pacakge, in the "docs" folder.

    Tsurumoto said:
    Regarding to the contents in above red box #2, is it talking about RS232(UART-USB) for XDS110?

    XDS110 us needed load the program.

    Regards,

    Charles O