TMP75: Alert Pin Termination of TMP75

Akihiro Hirata

Part Number: TMP75

Hello team,

Regarding TMP75, if alert is not used, The alert pin can be either be left floating or connected to GND?

Regards,

Hirata

+1 Josh Wyatt over 3 years ago

Dear Akihiro -

Thanks for posting. The ALERT pin on this device is an open drain output. If not used for some reason, it should be left floating.

0 Akihiro Hirata over 3 years ago

Hello Josh-san,

I understood. Thanks so much for your speedy answer!!

Regards,

Hirata

0 Josh Wyatt over 3 years ago in reply to Akihiro Hirata

どういたしまして！

Sensors forum