IWR1642BOOST

Tang David

Other Parts Discussed in Thread: IWR1642

I found it was difficult for me to download the source code of DSS and MSS with the instruction of users' guide of IWR1642 BOOST when I want to build the Demo lab. Pls refer to the feedback information asfollowing and let me know how to make it work.

Furthermore， I want to know the best range resolution of the sensor of IWR1642 Boost regarding it will be used to measure the human body for 生理特征. The necessary range resolution should be less than 0.1mm. Can the sensor work for this purpose？ Thank you！

over 2 years ago

0 Sabeeh Khan1 over 2 years ago

TI__Mastermind 20180 points

Are you behind any proxy or VPN? This may be the reason why you are unable to download the package. However, this is not the only way to get the source code. You can also download the Industrial Toolbox as a zip and get the source code after extracting. Follow the readme for more instructions: https://dev.ti.com/tirex/explore/node?node=AOeX-yPbUcqy5W0kmizXEQ__VLyFKFf__LATEST

In terms of range resolution, the best possible range resolution is about 4cm.Regardless of your sub-millimeter requirement, I would still experiment with the IWR1642 and see if it matches your expectations.

0 Tang David over 2 years ago

Prodigy 40 points

It didn't work either when I tried the new link website. I also found this website is still the same link you sent to me before. At the same time， I checked my computer and found no VPN or proxy being installed. It would be greatappreciated if you can send me thesource code file directly.

0 Sabeeh Khan1 over 2 years ago in reply to Tang David

TI__Mastermind 20180 points

I can not provide the source directly. Please explain and document (with as many screenshots as possible) the exact steps you are doing to download the package.

Do you see the 3 dots by "Industrial Toolbox" and can you click download? Please follow all steps in the readme linked above.

Sensors

Sensors forum

IWR1642BOOST