Tool/software:
Would the UCC2893 ever start if the chip is repowered before the voltage on the SS/SD pin drops below 0.5V typ?
Thank you very much,
Regards,
Petar
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Would the UCC2893 ever start if the chip is repowered before the voltage on the SS/SD pin drops below 0.5V typ?
Thank you very much,
Regards,
Petar