Hi team,
Customer wants to know the leakage current of IN-pin in order to decide the pull-up resister value.
Is it OK that the value is +/-100nA max as below?
Regards,
Noriyuki Takahashi
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
Customer wants to know the leakage current of IN-pin in order to decide the pull-up resister value.
Is it OK that the value is +/-100nA max as below?
Regards,
Noriyuki Takahashi
Hi Takahashi-san,
Yes, that would be the worst case leakage across temperature and voltage for this device. Using that to set your baseline pull-up resistor range is appropriate.
Thanks!
Bryan