Other Parts Discussed in Thread: SN74CBTLV1G125,
My customer want to use TMUX1237 to replace SN74CBTLV1G125.
I think the logic is good, but I am not sure if it is ok.
Could team give me some suggestions?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Looks good - the logic is the same and I don't see any problem with using the TMUX1237 to replace 2x SN74CBTLV1G125's here. One note about implementation is that the SEL pin should always have a defined logic state - so if SHT35_RST is ever floating I'd strongly suggest adding a pull-down / pull-up to ensure a defined logic state if SHT35_RST is ever floating - if it doesn't ever float there shouldn't be any issue.
Please let me know if you have any other questions!