Hello expert,
My customer only connect R, G, B signal and no use Hsync, Vsync, DAT and clock. Can we float H/V/DAT/CLK and leave VDD_5 open? Thanks a lot!
Best regards,
Ann Lien
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello expert,
My customer only connect R, G, B signal and no use Hsync, Vsync, DAT and clock. Can we float H/V/DAT/CLK and leave VDD_5 open? Thanks a lot!
Best regards,
Ann Lien
Hi Ann,
Please see our FAQ on how to handle unused pins:
In regards, to the supply pins, it is recommended to not let any supplies float and tie them to GND or a nominal supply rail.
Thanks!
Bryan