Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 16 subscribers
  • Views 344 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

HD-SDI & CVBS signal switch

TMUX136: HD-SDI & CVBS signal switch

Ankit Sohni
Prodigy 10 points
Part Number: TMUX136

I HAVE RELATED QUESTION REGARDING SWITCHING OF ANALOG (CVBS) & DIGITAL (3G-SDI) Video signal upto 2 channel max. I have 2 HD-BNC Connector on board wherein either CVBS (PAL) or SD/HD/3G-SDI video source may be connected. If it is CVBS signal, then it should be routed from HD-BNC connector to Video Decoder IC (ADV7181C) else it should be routed to SDI Cable Equalizer (M23554) IC. Switch selection is  through software (FPGA).

  • 0
    TI__Mastermind 28178 points

    Hey Ankit,

    What are the voltage and frequency of the waveforms you'll be trying to pass through the mux?
    TMUX136 could work here. It's a higher bandwidth device, 2 channel 2:1 device. You may not need the second channel if I'm understanding the request properly. 

    I will let you know as well, we are currently on thanksgiving holiday here in the US and will be back on Monday, 11/28.

    Thanks,
    Rami