This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi
I am planning to use TS5A3357.
We have 0.5V/3.3V/GND signals connected at NO1/NO3/NO2 respectively.
we will be switching between NO1/NO2 and NO3/NO2 to generate square wave at the output.
I wanted to know if we can switch between NO1/NO2 at 10MHz ?
Thanks
ATharva
10 MHz corresponds to 50 ns. The worst-case turn-on time is specified as 11 ns (and the jitter should be much smaller.)