• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 17 subscribers
  • Views 156 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMUX4051-Q1: Do we have multiplexers for ADC?

Iris Shen
Intellectual 2892 points
Part Number: TMUX4051-Q1

Hi team,

Do we have multiplexers for ADC? 

Thanks!

  • +1
    Guru 223360 points

    All analog multiplexers can be used with ADCs. Check that the desired voltage range and frequency are supported, and that the on-resistance does not increase the impedance of the signal too much for the ADC.

  • +1
    TI__Expert 5622 points

    Hi Iris,

    As Clemens mentioned, our multiplexers can indeed be used with ADC's. Key care bouts are going to be voltage levels, frequency/bandwidth for the application and on-resistance. We also have features such as automotive qualified, powered off protection, overvoltage protection, support for input voltage beyond supply and more. The TMUX4051-Q1 is a viable device for use with ADC's.

    Thanks!

    Alex