This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TS12A4516: Supply decoupling capacitor

Part Number: TS12A4516

Dear all,

we are planning to use TS12A4516 to switch a bipolar signal in the range +/- 4 V. In our design we will use a +/- 5V as supply and we are in doubt about decoupling capacitor.

On datasheet ( SCDS236B revised in April 2009) I can't find any raccomandation about the required decoupling capacitor.

Since internal construction is CMOS I'm wondering that a 100 nF ceramic cap between -V and +V should be suitable.

Thank in advance