CD4053B: It could not switch to Y side

Please specify the voltages that you measure at all these pins.

VAJ：11.41V;

DC:4.15V;

IN:0V;

INH:0.001V

ABC: High_to 3.307V,Low_to 0.002V

VEE,VSS:0V

These all voltages I measure.

Thanks for your reply.

I saw the silkscreen on the chip is "CM053B",is it CD4053B?

The A/B/C voltages are much too low; you are supposed to use V_DD as high level. Use the TMUX4053 instead.

For the marking, see ti.com/packaging/en/docs/partlookup.tsp?partmarking=CM053B.

So what should I set V_{DD, 5V or 3.3V  like "CD4051B typical application" in the picture to match A/B/C voltages?}

See the V_IH specification.

   The VIH input High Voltage not just for the X,Y,X or Y pin?

And  I set ABC 3.3V it higher than VIL MAX,lower than VIH MIN.Will CD4053B work unstably and something wrong?

  You said "The data I/Os are unbuffered analog switches and work with any voltage".

But when I set Vdd 5V and 22V in one data I/O,I could just get 5.3V in the other side data I/O.

Does it go wrong? 

Or Vdd voltage have a relationship with data I/O voltage?

Thanks for your reply.