SN74LVC1G3157-Q1: power consumption at Ta=105degC

Hello Yasushi,

For calculating the power Consumption for our devices, you can refer to this guide to calculate what that would look like:

https://e2e.ti.com/support/logic-group/logic/f/logic-forum/875721/faq-how-do-i-calculate-power-consumption-or-current-consumption-for-my-cmos-logic-device

In addition 

See below for parameters needed to calculate Cpd as it is not provided in this datasheet:

Note that it is advised to take some of these measurements from the lab to get a more precise estimation as it does depend on the board capacitance, ICC during operation, and input/output frequency ratio which will most likely be close to 1, but will be dictated by board parasitics.

Let me know if you have any other questions on this!

Thanks!

Kameron