• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 16 subscribers
  • Views 146 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMUX-24PW-EVM: Evaluate TMUX8108 with TMUX-24PW-EVM

ttd
Mastermind 7920 points
Part Number: TMUX-24PW-EVM
Other Parts Discussed in Thread: TMUX8108

Dear Technical Support Team,

I'm considering implementing and evaluating the TMUX8108PWR on the TMUX-24PW-EVM.

Is it possible to mount it using a soldering iron, and what are the mounting procedures with  and precautions that TI is assuming?

Best Regards,

ttd

  • 0
    TI__Expert 7235 points

    Hello ttd,

    The TMUX8108 is a 16 pin device while the EVM DUT footprint is 24 pins, but it won't be an issue. You can solder the device at the top 16 pins of the DUT footprint. 

    Yes, the PW package is large enough that using a soldering iron shouldn't be difficult. 

    When it comes to procedures and precautions, make sure you are not shorting together any pins of the device. Using a thin soldering wire is recommended.  

    Thanks,

    Nir