TMUX1136: TMUX1136DQAR

shivakumar kallurmath

Tool/software:

Need clarification for the below item ASAP as production has been stopped due to below issue. Need your support ASAP.

Supplier: Mouser

Make: Texas Instrument

As pe the Texas Instrument data sheet, the body marking on the component should be “136”. During the inspection it was observed as the component body mark as “11136”.

3 months ago

0 Clemens Ladisch 3 months ago

Guru 271570 points

Footnote (4) says:

There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.

The additional "11" looks like a date code.

0 shivakumar kallurmath 3 months ago in reply to Clemens Ladisch

Prodigy 10 points

Hi Thanks for reply, but in data sheet nowhere its mentioned it. Did you went any such situation, also in the package its exact part number...

When I tried to contact Texas Instrument there is no response.

0 Rami Mooti1 3 months ago in reply to shivakumar kallurmath

TI__Mastermind 26868 points

Hey Shivakumar,

Clemens is correct here. The 11 are the date codes and 136 are the top side marking.

Here it is on page 28 of the datasheet

And I went ahead and double checked it in our database to make sure that's what it should be for you and it is correct. The top side marking will be YM136 where YM are date codes for year and month.

Thanks,
Rami

Switches & multiplexers

Switches & multiplexers forum

TMUX1136: TMUX1136DQAR